Millinery Blocking Tool - Crown Pin Pusher 099

Millinery Blocking Tool: Crown Tools Pin Pusher 099

Maker: Crown Hand Tools Ltd, Sheffield, England

Rosewood Handle with Brass Ferrule

Overall Length: 6  3/4" Handle Length: 3"

Made from brass with a rosewood handle, the Crown Pin Pusher (Ramping) features a magnetic spring loaded ram which allows pins to be driven home without marking the work piece. Use this quality brad pusher to hold and drive wire brads into frames or small moldings. Overall length is 6-3/4-Inch. Comes in a protective sleeve and bonus box of stainless steel pins.

High quality pin pusher. Once you use this, you might throw away your thimble. Be careful to not push pins too deep and through thin sections of blocks

From Hat Blocks UK: Pin Pushers are ingenious tools. They have a place among the astute milliner’s tool kit and are in fact indispensable in some blocking situations. The pin pusher’s wooden handle fits comfortably into the hand and the metal tube into which the dressmaker’s pin is dropped, Dressmaker’s pins are hard to press into wooden blocks by hand and a thimble can be awkward to use, as it easily slips off the pinhead. A pin pusher gives you extra mechanical power 

In excellent condition